Thousands of gallons of diesel fuel from a Duke Energy plant leaked into the Ohio River during the night of Aug. 18 during an oil transfer at a Duke plant in New Richmond, Ohio, about 20 miles upstream from Cincinnati. 

Greater Cincinnati Water Works shut off intake valves in the river until the spill cleared to prevent taking in contaminated water. GCWW announced Wednesday morning that the spill had past and that operations had returned to normal.

Water Works officials estimated that the leak was between 2,000 and 5,000 gallons — a medium-sized spill by the Coast Guard’s standards for inland oil spills. It will take several days to clean up.

The city’s drinking water is safe due to abundant reserves, officials said, noting they anticipated having enough water to continue operating for more than enough time to get the spill cleaned up.

In the meantime, the Coast Guard has closed the Ohio River to water travel along a 15-mile stretch around the spill area. Several vessels are in the area to help contain the oil, which will most likely be sucked off the top of the water with a vacuum device.

There were several reports of chemical odors along the river in Cincinnati the morning of Aug. 19, officials said, including one call from a resident living on Kellogg Avenue who said the smell was strong enough to make his eyes burn. 

Jack Karnes, who lives near the river in the city’s California neighborhood, said he could smell the spill as soon as he woke up.

“I hauled oil for 10 years,” he told The Cincinnati Enquirer. “I knew what it was.”

The Walter C. Beckjord Generating Station, where the spill happened, is slated to close in January of 2015. Duke has said it decided to shutter the facility because necessary updates to comply with new environmental regulations will be too expensive. The plant emits large amounts of sulfur dioxide and other pollutants.

Leave a comment